front shaft for an ARO 10.4 diesel!

[jumabago]

Hey Guys...
I'm trying to sort of reconstruct the front prop shaft I have.
Ideally, my plan was to adapt something, but I can't without the two parts selected in the picture.
The internal diameter of both is 22.5 mm and the "males" that go into these have 20 "spikes".
does anybody know of any other brand? or if I will be able to find them at all?

thanks for everything, you guys are always awesome, cheers!

[Soryn]

worn splines?
A new complet shaft it's about 100E in romania.

[jumabago]

worn splines?
A new complet shaft it's about 100E in romania.

hey SorinTVY,
yes, the splines are totally worn...
I wonder, where in romania can I get a new one? is there a particular store or a site or anything like that?
i wish i could get it here for that kind of money...
thanks a lot!

[Soryn]

Small stores, in the town nearby the factory were the cars were built .
Its hard with the shipping. Sombody need's to by the part for you from the store ,end send it by a way of transport with aditional costs.
First thing you need to do,it's to mesure up the length off the shaft. The shaft it's made in different length's,different engine's .

[jumabago]

Small stores, in the town nearby the factory were the cars were built .
Its hard with the shipping. Sombody need's to by the part for you from the store ,end send it by a way of transport with aditional costs.
First thing you need to do,it's to mesure up the length off the shaft. The shaft it's made in different length's,different engine's .

do you know if you can just buy the 2 parts (they are similar in length and have the same diameter and number of splines) that plug into the gear box in the back and the front differential in the front?

my goal was actually to use just the neck (the section that has the splines) and adapt a new shaft, with entirely different (and easy to buy) u joints. so i can solve that problem for good...

thanks a lot for all your data!

[jumabago]

PS: Also, do you know of anybody in the campulung area that, in exchange of a service charge, of course, would buy and send those parts to me? I'm telling you, if there was somebody, this could be a great thing. I mean, I'm sure a lot more people here in Argentina would be very interested in buying difficult parts like these! thanks again!