10.4 parts? Looking for...

Presentations,questions,everything...only in english language,please

Moderator: UMMM461

Post Reply
DangerCell
Incepator
Incepator
Posts: 20
Joined: 10 Apr 2014, 10:00

10.4 parts? Looking for...

Post by DangerCell »

96' Aro 10.4 1.9d, looking for:
1. Repair manual

2. tie rod ends
This image id for mahindra jeep but need these articulation points for the aro 10.4
Image

Usually the whole end is installed, however on the aro, the articulation joint is held in place by a "C" clip....so maybe they sell just the articulation joint???

3. Oil seals for front "transfer case" (gear box where drive shafts for front wheels come from).

4. Oil seal where drive shaft enters rear differential (where drive shaft goes into rear axle)...it is leaking steadily

5. c.v. joint boots/seals and possibly the c.v. joints themselves

Hope i can bring this vehicle back to full potential! Thanks in advance for your help!

DangerCell
Incepator
Incepator
Posts: 20
Joined: 10 Apr 2014, 10:00

Re: 10.4 parts? Looking for...

Post by DangerCell »

Does no one know where to get any parts????
madluis, the links you posted were extremely helpful! THANKS!!! But there are some that I need that are not there :(
User avatar
ydaniel
Membru legendar
Membru legendar
Posts: 4674
Joined: 13 Jun 2007, 11:46
Location: bucuresti
Contact:

Re: 10.4 parts? Looking for...

Post by ydaniel »

Where are you from?
DangerCell
Incepator
Incepator
Posts: 20
Joined: 10 Apr 2014, 10:00

Re: 10.4 parts? Looking for...

Post by DangerCell »

I am from U.S. but live in Portugal for half the year...you?

User avatar
icemann
Membru
Membru
Posts: 188
Joined: 13 Jul 2012, 18:47
Location: Skopje, Macedonia

Re: 10.4 parts? Looking for...

Post by icemann »

DangerCell wrote:I am from U.S. but live in Portugal for half the year...you?
Hi, DangerCell.

I as you have problems with parts from my aro.
i tried the local shops and had success with some parts as they are interchangeable.
the Oil Seals you can find them in shops that sells bearings and seals. just remove the old one and make sure you dont damage the numbering.. or show it to the salesmen they usually have broad range of seals.
for the tie rods i got them to a guy that does restoration to tie rods but that makes them very hard and i dont recommend it. but if you take it to a guy that does that there is a chance that he finds you new tie rod ends. i think they are compatible with Dacia and Renault.
but not sure which model.

Best of Luck.
Garrettpymn
Nou venit
Nou venit
Posts: 2
Joined: 12 Aug 2016, 02:30

10 4 parts Looking for

Post by Garrettpymn »

Hi, Im looking for a programmer/developer that can build a CasparCG Client Software for us. Who to contact to send a general description of what we need?
https://www.levitradosageus24.com

Post Reply