Hello from USA

[1989 ARO 244]

HI owner of a 1989 ARO 244    I need trim pieces and info on A frame bushings, and a turn signal relay.  Powered by a Ford 2.3 litre.  Cheers  Terry

[Maxim]

Hi Terry!
Can You more widely set a question?
What problem with a frame bushings?
What problem with a turn signal relay?
Yes... Worldwide have run up ... Even up to USA

[1989 ARO 244]

HI  sorry for the broken english.

My a frame bushings are shot, broken, need replacment.

the turn signal relay will not work.  it has around 11 wires hooked to it, and it is red, and a large square shape. 

markings on relay

94251      1088

12V(2+1)X21W+3W

MADE IN ROMANIA



THANK YOU Terry

[Maxim]

Hi Terry!
It is  connection circuit and internal circuit the turn signal relay.

[1989 ARO 244]

Yes  that is it.....where can I find a new one?

[Maxim]

Hi Terry!
What for new?  
Repair, which is having. It is very simple.
Likely, the reason of malfunction not in the relay, in electrical wire circuits.
Check up a feed voltage (on 49) and connection with body (31),
connect a lamp between 49a and car body.
If relay will not work, disassemble, itself or with whose help, repair the circuit of the generator of pulses, or solder instead of the "native" circuit, circuit from ANYONE car (only from 12 volts), having placed the "new" circuit in the "native" case ...
Probably, new, is not has been find...

[1989 ARO 244]

ok thank you  I will try to repair it.  I have not had it to work since I have owned ARO..  The drawing will help very much    Terry

Now for the bushings....do you know what else they fit?

[Michael]

HI owner of a 1989 ARO 244    I need trim pieces and info on A frame bushings, and a turn signal relay.  Powered by a Ford 2.3 litre.  Cheers  Terry

This car is a good work for Chip Foose

[pantelimon]

HELLO USA!!
HAVE A SUME PICTURES UITH OUR ARO